What are the design steps of steel structure compartments

In the construction of indoor steel structure engineering, the first thing to consider is whether the environment is corrosive. If it is corrosive, be sure to use galvanized paint on the steel surface. That would be higher than the normal price. If it is built in an ordinary environment, as long as the columns are not more than 6 meters apart, there is no need to use large and thick steel. If large and thick steel is used, it will increase the bearing capacity of the original building and increase the dead weight of the new steel structure. Therefore, the more expensive the better, which is a false theory. Expensive options are not recommended unless circumstances are exceptional. After the construction is completed, it will be determined according to the use situation. For example, how many kilograms should be prepared for one square meter. This is important construction. The foundation is deeper and the column and beam are larger. If the bearing is very light, it can be used as a base.

When manufacturing steel frame compartments, customers can make their own requirements when contacting the construction company at the beginning, so that the steel frame compartment designer is more clear.

Before the construction of steel structure sandwich, it is necessary to inspect the construction site first, then measure the relevant data, read the load performance of the relevant original building structure, and draw up the preliminary plan. The scheme can be adjusted after customer confirmation or request modification, and a good design drawing can be established after adjustment according to the actual situation. The choice of steel will be clearly indicated on the drawing. If the customer has a problem with the steel, they can communicate and deal with it. A certain amount of shrinkage should be retained in the machined steel members. Once a prototype is made, it can be processed and manufactured. Steel components must be well cut, length, thickness and primed. After the steel components are processed, they can be transported to the construction site for installation. The concave installation must be fixed firmly. After the concave part is installed, steel beams and other components can be installed. Indoor engineering such as steel compartment is mostly used in industrial production site. There's going to be a lot of fuel. There is a need for protection plans in this area.